Five valve manifold - metering

The HM57 Five Valve Manifold combines two shutoff valves, two equalizing valves, and a vent/calibration valve into a single, compact assembly. The double equalizing arrangement insures against measurement error that can occur from equalizer leakage between high and low pressure connections, making the HM57 ideal for custody transfer applications.

When expensive liquid or gas changes ownership, precise measurement is critical. The smallest leakage from the high side of the manifold the the low side of the manifold can lead to lost revenue due to inaccurate measurement. Therefore, when dealing with custody transfer or other critical flows, a five valve manifold should be used to achieve more accurate measurement. The number of threaded connections is greatly reduced when using the HM57 instead of needle valves, piping and tees, and, with fewer connections, there are fewer potential leak points and reduced risk of fugitive emissions.

Features & Benefits

Reduce costs and installation time: using Hex five valve manifolds in place of the conventional arrangement of five individual needle valves, piping and tees provides a streamlined, low cost, easy to install assembly

Integral vent/calibration valve: shutoff, equalizing and vent/calibration functions are provided in one compact valve body weighing only 3.75 pounds (1,7 kgs). technicians can perform zeroing and calibration procedures at the manifold location with a minimum of tools.

Fewer leak points: the number of threaded connections are greatly reduced when using the HM57 in lieu of needle valves, piping and tees. With fewer connections, there are fewer potential leak points and reduced risk of fugitive emissions

Your choice of mounting styles: available with threaded by threaded, threaded by flanged, or flanged by flanged connections to meet a variety of mounting requirements


Sizes: 1/2″ Flanged
Ratings: 6980 psi @ 100°F; 3525 psi @ 10000°F (Stainless Steel with graphite packing); 450°F limit for Teflon

Get A Quote

  • This field is for validation purposes and should be left unchanged.